Your trucks need the right legal markings, applied correctly, on every unit. Fleet Decal Depot cuts the decals to spec; Wrap It! installs them on the vehicle, anywhere in the country.
Every commercial motor vehicle that falls under FMCSA rules has to display the carrier's legal name and USDOT number on both sides of the power unit, in letters that contrast with the background and can be read from 50 feet in daylight. Many states add their own numbers on top of that — a California CA number, a Texas TxDMV number, state intrastate numbers — and some industries add more. Getting the decal right is half the job. Getting it on the truck straight, level, in the right place and matched across every vehicle in the fleet is the other half, and that is the part Wrap It! handles.
Wrap It! Innovative Installs and Fleet Decal Depot are sister companies. Fleet Decal Depot makes the decals: cut vinyl USDOT numbers, legal-name lettering, MC and state numbers, GVWR panels and full compliance kits, sized to the regulations and shipped nationwide. Wrap It! supplies the installer. For a single truck, most owners apply the decal themselves with the included instructions. For a fleet, a rebrand or a vehicle that has to pass an inspection tomorrow, we send a certified installer to your yard.
The federal baseline is the carrier's name as it appears on the MCS-150 and the USDOT number preceded by the letters "USDOT". The exact size is not written into the federal rule — legibility from 50 feet is the test — which is why most fleets standardize on two-inch or taller lettering in a high-contrast color. State requirements vary widely. Rather than guess, run your vehicle through the free DOT compliance checker on Fleet Decal Depot; it tells you what your state requires and links to the matching decal. If you operate across several states, the state-by-state USDOT guide covers each one.
Most carriers put the name and number on the cab doors, below the window line, where an inspector expects to find them. The decal has to sit on a clean, flat, painted surface — not across a seam, rivet line or door handle recess — and it has to be level with the body line so the fleet reads as one standard. Our installers clean and prep the surface, position the decal with a hinge method, apply it with a squeegee to avoid trapped air, and remove the transfer tape only after the vinyl has bonded. On a textured or recently painted surface we check adhesion before we commit the whole set.
When a company changes its legal name, gets a new USDOT number, or buys a batch of used trucks that still carry someone else's markings, the work is time-sensitive and repetitive: remove the old numbers, clean the adhesive, apply the new set, photograph the result, move to the next unit. We stage that work at your yard in phases so vehicles keep running. Fleet Decal Depot ships the decal sets with unit-by-unit labeling, so the installer never has to sort numbers on site, and its fleet volume pricing keeps larger orders economical.
If you have one or two vehicles and a free afternoon, you do not need us. Fleet Decal Depot's step-by-step installation guide and its install and removal kit cover everything a careful owner-operator needs. Call Wrap It! when the count, the surface or the deadline makes a professional installer the cheaper option.
In our home market, installation is a direct add-on: Fleet Decal Depot customers in the Las Vegas valley can book a Wrap It! installer to apply their order on-site through the Las Vegas installation page. Everywhere else, request a quote and we dispatch a certified local installer from our network.
Our process is the same in every market, which is exactly why the results are consistent. From the first brief to final sign-off, one point of contact owns your project and the same quality steps run on every job.
You send us the scope — graphic types, locations, square footage and timeline. We return a clear, itemized estimate with no surprises. If the project spans multiple markets, we build a single master plan that covers all of them.
We match your job to certified installers in each market based on location, graphic type and scope. Every installer is vetted, insured and certified before they are eligible for your work.
We confirm site access, handle certificates of insurance where required, sequence the schedule, and coordinate logistics so your install lands in the right window. You do not chase vendors — we run it.
Installers prep the surface to spec and apply your graphics to a professional standard. Every job is documented with before-and-after photography and closed with a punch-list sign-off.
For multi-location work, you get progress reporting against the master schedule — which sites are done, in progress and pending — so you always know exactly where the rollout stands.
Every job is photo-documented before and after. A few from the portfolio.
No. We install compliance decals from any supplier. We recommend Fleet Decal Depot because the sizing is built around the regulations and fleet orders arrive labeled by unit, which makes installation faster and cleaner.
On both sides of the power unit, almost always on the cab doors below the window line, on a flat painted area clear of seams and handles. The number must be preceded by "USDOT" and be legible from 50 feet in daylight.
The federal rule is a legibility test, not a fixed size. Most fleets use two-inch or taller letters in a color that contrasts with the paint. Some states and some permits specify a size, which the free compliance checker on Fleet Decal Depot will flag.
Yes. Removal of outdated USDOT numbers, previous owner markings and adhesive residue is part of a standard rebrand install. See our vinyl graphic removal service for what is involved.
Yes. That is the typical job. We phase the work so trucks stay in service, standardize placement across every unit and photograph each one for your records.
Yes. State carrier numbers, intrastate markings, GVWR panels and unit numbers are all in scope. Use the compliance checker to confirm what your state requires before ordering.
Standard scheduling is a few business days in most markets. Rush and inspection-driven installs can often be mobilized within 24–48 hours through our emergency support program.
Yes — it is our home market. Fleet Decal Depot customers in the valley can add local installation directly on its Las Vegas installation page.
Our installers apply what you ordered to the placement standard you approve. For what the law requires on your vehicle, use the free compliance checker or speak with your safety compliance advisor; we do not provide legal advice.
Send the vehicle count, vehicle types, yard locations and your deadline through the Request a Quote form. If you already have a Fleet Decal Depot order number, include it and we will match the install to it.
Send your scope and timeline. We'll match it to certified installers and manage the job through one point of contact.
Request a Quote